Motor/Gearhead Pricing
Small Coreless Motors (*)(**)
Surplus Motors 1516, 1624, 1915, 2225 and 2233..............$19.95
Special offer for 1st Motor Sample....................................$10.00
Surplus Motors, 2625 & 2642...........................................$24.95
Special offer for 1st motorSample.................................... $15.00
Dealer and Club discounts available on above motors

19 mm in diameter and smaller (See Picture Below)

Surplus Motors with 16A, Std Ratio Gearhead..................$34.95
Surplus Motors with 16A, Custom Ratio Gearhead............$39.95 and Up

1516 Faulhaber
This motor has a 1.5 mm shaft and a 10 mm bolt circle to accept the 16A (Black) Gearhead. Other gearheads are available (15/1 & 15/2), pricing and specifications, in PDF format, are available upon request.

1624 Faulhaber
This motor has a 1 mm shaft and a 10 mm bolt circle to accept a 16A (Black) Gearhead. Other gearheads are available (16/1 & 16/2), pricing and specifications, in PDF format, are available upon request.

The Surplus 1516 and 1624 motors are also available with a flywheel mounted inside a 15/2 or 16/2 gearhead .........................$59.95
The NEW Faulhaber 1516 and 1624 motors can be obtained with double shafts for mounting a gearhead at one end and a flywheel at the other. Prices/delivery available upon request.

1915 Surplus
This motor is available with a 1 mm shaft
Fitted with 16A Custom Gearhead..........................$39.95
Fitted with Custom Gearhead.................................Pricing Upon Request
This motor is one of the shortest available (15 mm) in the industry and with a 16A gearhead the overall length is 28 mm long, but with a custom gearhead only 24 mm long.

(*) Motor Numbering System - the fist two digits of a motor number represent the outside diameter of the motor, in millimeters (mm). The third and forth digits represent the length of the motor body, in mm. Example: 1624 is a motor that is 16 mm in diameter and 24 mm long. One inch equals 25.4 mm. Therefore, a 1624 motor is 0.63 inches in diameter and 0.94 inches long.
Sleeving is available to meet your desired shaft diameter requirements
(**) All prices exclude shipping and handling. S & H charges are $5.00 for a shipment of five motors or less.

Place An Order/Ask a Question